The Florida Space Grant Consortium is located at the Partnership 1 Building at the Central Florida Research Park in Orlando. We are in room 218 on the second floor within the Florida Space Institute.
To contact us via mail:
Florida Space Grant Consortium
Room # 218,
PO Box # 160650,
Orlando, FL 32826 – 0650
Fedex and special delivery address:
Florida Space Grant Consortium
Partnership 1 Building, #8111
12354 Research Parkway
Room 218
Orlando, FL 32826
To contact us via fax:
407-823-6359
To contact us via telephone:
407-823-6177
To contact us via email:
- Florida Space Grant Consortium:fsgc@ucf.edu, Room 218, 407-823-6177
- Dr. Jaydeep Mukherjee, Director:jaydeep.mukherjee@ucf.edu, Room 218, 407-823-6177
- Ms. Mary (Gabriella) Gentry, Program Co-ordinator: maria.gentry@ucf.edu, Room 216-A, 407-963-9161
Directions to FSGC Office:
Partnership I Building
12354 Research Parkway, Room 218
Orlando, FL 32826
- From Campus: Turn onto Libra Drive at the Water Tower. Follow Libra past the Police Department and it becomes Discovery Drive. Make a right at Research Parkway.
- From Daytona Beach on I-4: Exit 101AB onto 417 south. Take 417 south (Toll Road) to University Blvd-East. Follow directions below to FSI:
- From Tampa on I-4: Exit 72 onto east 528 (Toll Road). Go past Orlando International Airport to 417 north. Take 417 north (Toll Road) to University Blvd-East. Follow directions below to FSI:
- From University Blvd: Follow University Blvd. to Alafaya Trail. Turn right onto Alafaya Trail.Turn left at second light, onto Research Pkwy.On Research Parkway, go past Technology Parkway.Take the first right turn after Technology Parkway. The road does not have a name. There is a company called L3 Communications, opposite this unnamed road, located on Research Parkway The Partnership Building 1 is the first building on the left. The FSGC Office (Room 218) is on the second floor
- Gate by-pass instructions: When you take the road to come to Partnership Building 1, you will encounter a gate with an arm. The arm will be down. There is a console to the left just before the arm. Just follow the instructions to open the arm. You may have to repeat the procedure 2 o 3 times. It might say “Access denied”. Just ignore it. Usually, the arm opens when you repeat the instructions couple of times.